← All Agricultural/Bioengineering Flashcard Decks

Strength of Materials Flashcards

7 cards from real Agricultural/Bioengineering practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Strength of Materials flashcards as text
  1. A sprinkler pipe made of PVC has an inner diameter of 50 mm, wall thickness of 4 mm, and internal water pressure of 0.8 MPa. What is the hoop stress?

    Answer: 5 MPa

    Hoop stress = pr/t = 0.8 × 0.025 / 0.004 = 5 MPa (r = inner radius = 25 mm).

  2. Which of the following best describes 'creep' in a polymer biofilm carrier used in a wastewater treatment bioreactor?

    Answer: Time-dependent plastic deformation under sustained stress below yield strength

    Creep is the slow, continuous deformation of a material under constant stress over time, especially significant in polymers at elevated temperatures.

  3. In a combined loading scenario, a tractor PTO shaft simultaneously carries a torque of 800 N·m and a bending moment of 400 N·m. The von Mises equivalent stress is used to assess failure against:

    Answer: Tensile yield strength of the shaft material

    The von Mises criterion predicts yielding when the equivalent stress equals the uniaxial tensile yield strength of the material.

  4. A rectangular cross-section timber beam (b=150 mm, d=300 mm) is loaded in bending. The maximum shear stress in the beam occurs:

    Answer: At the neutral axis

    For a rectangular cross-section, the shear stress distribution is parabolic and reaches its maximum at the neutral axis.

  5. A steel wire rope used to lift bales in a hay storage system has a rated breaking strength of 50 kN. If a safety factor of 5 is required, what is the maximum allowable working load?

    Answer: 10 kN

    Allowable load = Breaking strength / Safety factor = 50 kN / 5 = 10 kN.

  6. During strain gauge testing of an agricultural equipment frame, a gauge reads a strain of 750 microstrain (750 × 10⁻⁶). If E = 200 GPa, what is the corresponding stress?

    Answer: 150 MPa

    Stress = E × ε = 200 × 10⁹ × 750 × 10⁻⁶ = 150 MPa.

  7. A biological tissue scaffold in an agricultural bioengineering application exhibits viscoelastic behavior. This means the scaffold:

    Answer: Shows both elastic (spring-like) and viscous (dashpot-like) mechanical responses

    Viscoelastic materials combine elastic energy storage with viscous energy dissipation, making their response time- and rate-dependent.