Weapons Maintenance & Cleaning Procedures Flashcards
7 cards from real ACT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Weapons Maintenance & Cleaning Procedures flashcards as text
What is the FIRST step a security officer must take before cleaning a duty firearm?
Answer: Verify the firearm is unloaded and remove the magazine
Verifying the firearm is unloaded and removing the magazine is the mandatory first step to prevent accidental discharge during cleaning.
Which solvent is most commonly used to remove carbon and powder fouling from a firearm barrel?
Answer: Hoppes No. 9 bore cleaner
Hoppes No. 9 is a specifically formulated bore cleaner designed to dissolve carbon, lead, and powder fouling from firearm barrels.
How frequently should a duty firearm carried by an Act 235-certified security officer be inspected for function and cleanliness?
Answer: Regularly — at minimum before each duty shift
A duty firearm should be inspected before each shift to ensure it is clean, functional, and safe for use in the field.
When field stripping a semi-automatic pistol for cleaning, which component is typically removed first after the magazine?
Answer: The slide assembly
On most semi-automatic pistols, the slide assembly is removed first after the magazine, allowing access to the barrel, recoil spring, and frame.
What is the PRIMARY purpose of lubricating a firearm after cleaning?
Answer: To reduce friction between moving parts and ensure reliable function
Lubrication reduces friction between metal moving parts, preventing excessive wear and ensuring the firearm cycles reliably.
Which tool is specifically designed to clean the bore (inside of the barrel) of a pistol?
Answer: A wire brush attached to a cleaning rod
A wire bore brush attached to a cleaning rod is designed to scrub the rifling and barrel interior to remove fouling and deposits.
After running solvent-soaked patches through a firearm barrel, what is the correct next step?
Answer: Run dry patches through until they come out clean, then apply a light coat of oil
Dry patches remove dissolved fouling and residual solvent; a light oil coat then protects the barrel from corrosion.