Practice Test Geeks(ACE) Autodesk Certified Expert Practice Test
← All ACE Flashcard Decks

Industry-Specific Applications Flashcards

7 cards from real ACE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Industry-Specific Applications flashcards as text

  1. A product designer using Alias wants to evaluate the smoothness of a Class-A surface. Which diagnostic tool reveals surface curvature continuity visually?

    Answer: Zebra stripe analysis

    Zebra stripes simulate reflections of parallel lines across surfaces, making curvature discontinuities immediately visible.

  2. In Autodesk Revit MEP, which setting governs the maximum velocity allowed in a duct segment during duct sizing?

    Answer: Mechanical Settings > Duct Settings

    Mechanical Settings in Revit MEP stores duct sizing parameters including maximum velocity, friction, and pressure constraints.

  3. An infrastructure engineer using InfraWorks needs to propose multiple highway alignment alternatives. Which tool supports this scenario?

    Answer: Proposal comparison using Alternative Models

    InfraWorks Alternative Models allow multiple design proposals to coexist in one project for visual and analytical comparison.

  4. When a factory layout engineer uses Autodesk Factory Design Utilities, what is the primary benefit of placing assets from the Factory Asset Library?

    Answer: Assets are intelligent objects with defined footprints, clearances, and connectors for flow analysis

    Factory Asset Library objects carry metadata including footprint, clearance zones, and connector points used in flow and utilization analysis.

  5. In Autodesk Revit, which method correctly transfers project standards (view templates, line styles, etc.) between two project files?

    Answer: Use Transfer Project Standards from the Manage tab

    Transfer Project Standards lets users selectively copy standards like view templates, filters, and line patterns from one open Revit project to another.

  6. A structural steel detailer using Advance Steel needs to produce NC (CNC) files for a fabricator. Which output format is standard for this workflow?

    Answer: DSTV (NC1) file format

    DSTV NC1 is the standard CNC machine language used by steel fabrication equipment, and Advance Steel exports it directly from the model.

  7. In Autodesk Navisworks Manage, which action is required before running Clash Detective to ensure clashes between two models are detected?

    Answer: Append or merge the models so both exist in the same Navisworks scene

    Both models must be present in the same Navisworks scene (appended or merged) for Clash Detective to test geometry intersections between them.