ABO Quality & Compliance Flashcards
7 cards from real ABO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 ABO Quality & Compliance flashcards as text
In a dispensary quality control program, 'receiving inspection' refers to:
Answer: Verifying finished eyewear from the lab against the original order before dispensing
Receiving inspection is the process of checking finished eyewear returned from the optical lab against the work order and ANSI standards before dispensing to the patient.
Which prism tolerance applies to a finished lens with a prescribed prism of 3.00 prism diopters, according to ANSI Z80.1?
Answer: ±0.33 prism diopters
ANSI Z80.1 allows a tolerance of ±1/3 prism diopter for prescribed prism up to 3.00Δ, which equals ±0.33Δ at exactly 3.00Δ.
A patient's lenses are found to have a small bubble in the coating near the optical center. According to ANSI Z80.1, this is evaluated based on:
Answer: Whether the bubble falls within the clear aperture zone
ANSI Z80.1 defines acceptable defect criteria based on the clear aperture zone; defects within this critical area are grounds for rejection.
Which of the following best describes the role of ANSI Z80.5 in optical quality compliance?
Answer: It sets requirements for frames for prescription ophthalmic lenses
ANSI Z80.5 specifies requirements for frames used with prescription ophthalmic lenses, including dimensions, material safety, and mechanical performance.
An optician notes that a patient's frame temple is cracked but the patient insists on receiving the glasses today. The ethical and compliant action is to:
Answer: Refuse to dispense until a safe replacement frame is used
Dispensing frames with structural defects creates a safety hazard; the optician must refuse to dispense until a structurally sound frame is used.
Under HIPAA, a business associate agreement (BAA) is required when an optical practice shares patient health information with:
Answer: An optical lab that processes patient prescriptions
An optical lab is a business associate because it performs services for the practice involving patient PHI, requiring a formal BAA to define data protection responsibilities.
What is the primary purpose of maintaining a returned goods log in an optical dispensary?
Answer: To document lab remakes for trend analysis and quality improvement
A returned goods log tracks remakes sent back to the lab, enabling the dispensary to identify patterns of lab error and drive quality improvement initiatives.