Practice Test Geeks(7D) 7D Pupil Driver Exam Practice Test
← All 7D Flashcard Decks

Student Loading and Unloading Zone Procedures Flashcards

6 cards from real 7D practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Student Loading and Unloading Zone Procedures flashcards as text

  1. Before students begin unloading, what must the school bus driver do after stopping at the unloading zone?

    Answer: Shift to park (or neutral with brake set), activate the stop-arm and amber/red lights, and ensure the zone is safe before opening the door

    The driver must secure the bus, activate warning systems, and verify the unloading zone is safe before allowing students to exit.

  2. A student who must cross the road after unloading must cross where in relation to the bus?

    Answer: In front of the bus at least 10 feet ahead of the bumper

    Students crossing must always cross in front of the bus at least 10 feet ahead of the front bumper, where the driver can see them.

  3. What is the 'danger zone' around a school bus, and why must drivers be especially alert about it during loading and unloading?

    Answer: The area within 10–12 feet on all sides of the bus where a driver may not be able to see a student

    The danger zone is the area within 10–12 feet around all sides of the bus where the driver may have blind spots — students in this zone may be invisible to the driver.

  4. A student drops a belonging (backpack, ball) near the bus front tire during loading. What should the driver instruct the student to do?

    Answer: Tell the driver first, then retrieve it only after the driver confirms it is safe and can see the student

    Students must always tell the driver before retrieving items near the bus — the driver must see the student before they enter the danger zone.

  5. How long must a school bus driver wait with the stop-arm extended after all students have unloaded before closing the arm and proceeding?

    Answer: The driver must wait until all students who must cross have crossed and are safely on the other side

    The driver must keep the stop-arm extended and wait until all crossing students have safely crossed and reached the curb or sidewalk before retracting it.

  6. Which California law requires all drivers of other vehicles approaching a stopped school bus with flashing red lights to stop?

    Answer: California Vehicle Code Section 22454

    California Vehicle Code Section 22454 requires all drivers to stop for a school bus displaying flashing red lights.