Vehicle Inspection and Equipment Flashcards
6 cards from real 7D practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Vehicle Inspection and Equipment flashcards as text
According to Massachusetts regulations for 7D vehicles, what is the minimum required tread depth for all tires?
Answer: 4/32 of an inch
Massachusetts regulations (540 CMR 21.00) explicitly state that all tires on 7D school pupil transport vehicles must have a minimum tread depth of 4/32 of an inch to pass inspection.
During a pre-trip inspection, you notice your 7D vehicle, which is not equipped to transport wheelchairs, is missing one piece of required safety equipment. Which of the following items, if missing, would NOT be a violation?
Answer: A fire/evacuation blanket
A fire/evacuation blanket is only mandatory for 7D vehicles that are equipped to transport wheelchairs. The other items, including a body fluid clean-up kit, a seat belt cutter, and a properly rated fire extinguisher, are required on all 7D vehicles.
A 7D driver is preparing for their morning route. Which of the following is a mandatory check during the daily pre-trip inspection?
Answer: All of the above
A thorough pre-trip inspection involves checking all aspects of the vehicle's readiness and compliance. This includes verifying that all required equipment, such as the child reminder system, is working, all required markings are present, and that the vehicle's official inspections are up to date. While the sticker is checked semi-annually by an inspector, the driver has a daily responsibility to ensure the vehicle is compliant.
Which of the following pieces of equipment became mandatory on all 7D vehicles as of October 1, 2019?
Answer: Audible backup alarm
Massachusetts implemented phased regulation changes. As of October 1, 2019, all 7D vehicles were required to have both an audible backup alarm and an interior school bus light indicator.
In addition to the annual state inspection required for all passenger vehicles, how often must a 7D vehicle undergo a specific 7D safety inspection?
Answer: Every six months (semi-annually)
According to M.G.L. c. 90, Sec. 7A and 540 CMR 21.00, 7D vehicles are required to have a semi-annual safety inspection. These inspections are scheduled for the periods of October-November and February-March.
When inspecting the exterior of a 7D vehicle, what are the specific requirements for the company identification markings?
Answer: Company name, city, and state on both sides in lettering at least 2 inches high
Regulations require that all 7D vehicles must have the company name, city, and state visibly displayed on both sides of the vehicle. The lettering must be at least two inches high and in a contrasting color to be easily readable.