Postal 473 Part B - Certificate of Bulk Mailing 1 — Questions and Answers

Question 1: If the bulk mailing was sent First Class, where would this be indicated?

Box 3a
Box 5
Box 3b (Correct answer)
Box 2

Correct answer: Box 3b

On a postal bulk mailing form, Box 3b is specifically designated for indicating the class of mail being sent. Therefore, if a bulk mailing is sent First Class, this information would be entered in Box 3b to specify the service level. This helps postal workers process the mail correctly and ensures appropriate postage rates are applied.

Question 2: Which would NOT be an appropriate entry for Box 3b?

First Class
Priority Mail
Standard
Bulk (Correct answer)

Correct answer: Bulk

Box 3b on a postal form is used to specify the *class* of mail, such as First Class, Priority Mail, or Standard Mail. 'Bulk' is a *type* of mailing (referring to quantity and preparation), not a mail class itself. Therefore, 'Bulk' would not be an appropriate entry for a box specifically asking for the mail class.

Question 3: If the customer is mailing 1500 identical pieces, where would they put this information?

Box 3a (Correct answer)
Box 3d
Box 3e
This information is not required.

Correct answer: Box 3a

Box 3a on the postal form is designated for the 'Number of Pieces' in the mailing. If a customer is sending 1500 identical pieces, this quantity would be entered in Box 3a. This information is crucial for calculating total postage and verifying the mailing's volume for processing.

Question 4: Where would the customer sign the form?

Box 5
Box 6
Customer’s signature is not required (Correct answer)
Box 4

Correct answer: Customer’s signature is not required

For many standard bulk mailing forms, the customer's signature is not explicitly required in a designated box. The form primarily serves as a record of the mailing details and postage calculation. While the mailer's information is provided, a formal signature box for the customer is often absent, making it unnecessary.

Question 5: If the customer is mailing 100 pieces each weighing 2 pounds, what would be the correct entry for Box 3e?

100
2
50
200 (Correct answer)

Correct answer: 200

Box 3e typically requires the 'Total Weight' of the mailing. If there are 100 pieces, and each piece weighs 2 pounds, the total weight would be 100 pieces * 2 pounds/piece = 200 pounds. This total weight is essential for calculating the correct postage for the entire mailing, as rates are often weight-based.

Question 6: If the customer is mailing 150 pieces, where would this fee be indicated?

Box 1a (Correct answer)
Box 1b
Box 1c
Box 3b

Correct answer: Box 1a

Box 1a on the postal form is typically designated for the 'Permit Fee' or 'Annual Mailing Fee' associated with bulk mailings. If a customer is mailing 150 pieces, they would likely be using a bulk mail permit, and any associated fees for that permit would be recorded in Box 1a, separate from per-piece postage.

Question 7: If each piece of mail requires $0.31 postage, where would this be indicated?

Box 3a
Box 3c (Correct answer)
Box 3f
Box 3g

Correct answer: Box 3c

Box 3c on the postal form is typically designated for the 'Postage Per Piece.' If each individual piece of mail requires $0.31 in postage, this unit rate would be entered in Box 3c. This information is then used to calculate the total postage for the entire mailing.

Question 8: If 100 pieces of mail weigh 1 pound, what would be the correct entry for Box 3d?

100 (Correct answer)
1
10
0.1

Correct answer: 100

Box 3d on the postal form typically asks for the 'Weight Per Piece' or 'Pieces Per Pound.' If 100 pieces of mail collectively weigh 1 pound, then the entry for 'Pieces Per Pound' would be 100. This indicates the density of the mail, which is important for postage calculations for lightweight items.

Question 9: If the customer wants a duplicate copy of the form (for an additional fee), where would this fee be indicated?

Box 1a
Box 3g
Box 1c (Correct answer)
Box 3c

Correct answer: Box 1c

Box 1c on the postal form is often designated for 'Other Fees' or specific service charges. A fee for a duplicate copy of the form would fall under such a category, as it's an additional service requested by the customer. This ensures all charges are properly accounted for and itemized.

Question 10: Which is an appropriate entry for Box 3f?

4/12/2008
A checkmark
$281.94 (Correct answer)
0

Correct answer: $281.94

Box 3f on the postal form is typically designated for the 'Total Postage' or 'Total Amount Due.' This box would contain the calculated monetary value for the entire mailing, representing the sum of all postage and fees. Therefore, a dollar amount like $281.94 is an appropriate entry, indicating the total cost.

Question 11: If Victor DeSales is mailing the material, where would this be indicated?

Box 4
Box 5 (Correct answer)
Box 6
Box 2

Correct answer: Box 5

Box 5 on the postal form is typically designated for the 'Mailer's Name and Address' or 'Permit Holder's Name.' If Victor DeSales is the one mailing the material, his name would be entered in Box 5. This identifies the sender responsible for the bulk mailing and provides contact information.

Question 12: Where would a postmark be entered?

Next to Box 6
Above Box 6
Box 2 (Correct answer)
Postmark is not required

Correct answer: Box 2

Box 2 on the postal form is typically designated for the 'Date of Mailing' and often includes space for the official postmark. The postmark is applied by the postal service to indicate the date and location the mail was accepted. This serves as an official record of the mailing transaction and its acceptance by the USPS.

Question 13: If the customer is mailing fewer than 1000 pieces, where would this be indicated?

Place a checkmark in line 1b
Box 3d
Box 2
Box 3a (Correct answer)

Correct answer: Box 3a

Box 3a on the postal form is designated for the 'Number of Pieces' in the mailing. If a customer is sending fewer than 1000 pieces, this specific quantity would be entered in Box 3a. This information is critical for determining if the mailing qualifies for certain bulk rates or requires specific handling based on volume.

Question 14: Which of these would be a correct entry for Box 3c?

First Class
Yes
$0.18 (Correct answer)
No

Correct answer: $0.18

Box 3c on the postal form is designated for the 'Postage Per Piece.' This field requires a monetary value representing the cost to mail a single item. Therefore, a dollar amount like $0.18 is a correct entry, indicating the unit postage rate for each piece in the mailing.

Question 15: If the total weight of the mailing was 14 pounds, where would this be indicated?

Box 3e (Correct answer)
Box 3d
Box 3f
Box 2

Correct answer: Box 3e

Box 3e on the postal form is typically designated for the 'Total Weight' of the entire mailing. If the combined weight of all pieces is 14 pounds, this figure would be entered in Box 3e. This total weight is a critical factor in calculating the overall postage cost for the bulk mailing, as rates are often weight-based.

Question 16: If the customer is mailing the material on 4/12/2008, where would this be indicated?

Next to Box 6
Box 4
By the postmarking in Box 2 (Correct answer)
Box 5

Correct answer: By the postmarking in Box 2

Box 2 on a postal form, such as a Postage Statement (e.g., PS Form 3600-PM), is typically reserved for official postmarking and postage payment methods. The postmark itself includes the date the mail is processed and accepted by the USPS. Therefore, the mailing date of 4/12/2008 would be indicated by the postmarking in Box 2.

Question 17: Which of these would be a correct entry for Box 3d?

Yes
A checkmark
24 (Correct answer)
$0.18

Correct answer: 24

Box 3d on a postage statement is specifically designated for 'Pieces Per Pound.' This field requires a numerical entry indicating how many individual mail pieces constitute one pound of the mailing. This information is crucial for calculating postage based on weight, making a number like '24' a correct entry.

Question 18: Victor DeSales is mailing the material for Watterson Supply Company. Where would “Watterson Supply Company” be entered?

Box 5
Box 6
Box 2
Box 4 (Correct answer)

Correct answer: Box 4

Box 4 on a postage statement (e.g., PS Form 3600-PM) is typically labeled 'Permit Holder's Name and Address' or 'Company Name.' Since Watterson Supply Company is the entity for whom the mail is being sent, it represents the permit holder or the company responsible for the mailing. Therefore, 'Watterson Supply Company' would be entered in Box 4.

Question 19: If a pound of mail contains 22 pieces, where would this be indicated?

Box 3d (Correct answer)
Box 3a
Box 3e
Box 3b

Correct answer: Box 3d

Box 3d on a postage statement is specifically designated for 'Pieces Per Pound.' This field requires a numerical entry to specify how many individual mail pieces make up one pound of the mailing. This information is critical for postal clerks to verify the weight-based postage calculations for bulk mailings.

Question 20: Which of the following would be an appropriate entry for Box 2?

A Postmark
Postage
Meter Stamp
All of the Above (Correct answer)

Correct answer: All of the Above

Box 2 on a postage statement (like PS Form 3600-PM) is where the method of postage payment is indicated. This can include a physical postmark applied by the USPS, the total postage amount paid, or details of a meter stamp used for payment. Therefore, all these options are appropriate entries or indicators for Box 2.

Question 21: If 1800 pieces of identical mail are being sent with $0.22 postage on each piece with a total weight of 147 pounds 4 oz., where would you enter “$0.22”?

Box 3f
Box 3c (Correct answer)
Box 3a
Box 3d

Correct answer: Box 3c

Box 3c on a postage statement is typically designated for 'Postage Per Piece.' This field is used to record the individual postage amount applied to each identical piece of mail in a bulk mailing. Therefore, '$0.22' would be entered here to reflect the per-piece postage rate.

Question 22: If 2800 pieces of identical mail are being sent with $0.18 postage on each piece with a total weight of 117 pounds, where would you enter 117?

Box 3e (Correct answer)
Box 3c
Box 3a
Box 3d

Correct answer: Box 3e

Box 3e on a postage statement is typically designated for 'Total Weight.' This field requires the total weight of the entire mailing in pounds, which is essential for calculating and verifying weight-based postage. Therefore, '117' representing the total weight would be entered in Box 3e.

Question 23: The postmaster (by their signature) certifies all of the following EXCEPT which one?

The number of pieces of mail
The weight of the mail (Correct answer)
That the mail has been received
The postage of the mail

Correct answer: The weight of the mail

While the postmaster's signature certifies the receipt of mail, the number of pieces, and the postage paid, the actual weight of the mail is typically verified by a postal employee using scales. The postmaster's signature certifies the overall acceptance and processing based on the information provided and verified by staff, but not the physical weighing itself. Thus, the weight of the mail is not directly certified by their signature.

Question 24: Which of these would be a correct entry for Box 3b?

$0.18
Priority Mail (Correct answer)
1800
A checkmark

Correct answer: Priority Mail

Box 3b on a postage statement is typically designated for 'Class of Mail' or 'Service Type.' This field specifies the mail service being used for the mailing. Therefore, 'Priority Mail' is an appropriate entry to indicate the service class.

Postal 473 Part B - Certificate of Bulk Mailing 1

If the bulk mailing was sent First Class, where would this be indicated?