HazMat Hazardous Materials (HazMat) Endorsement Operations 4 — Questions and Answers
Question 1: Which class of hazardous material requires the 'POISON' or 'TOXIC' label?
- Class 3
- Class 5
- Class 6 (Correct answer)
- Class 8
Correct answer: Class 6
Class 6 hazardous materials are poisonous/toxic substances and infectious substances, which require the POISON or TOXIC label.
Question 2: What is a 'hazardous waste manifest' used for?
- Tracking hazardous waste from its point of origin to the disposal facility (Correct answer)
- Certifying the driver's training for waste transport
- Listing approved disposal sites in each state
- Recording the driver's route for hazardous waste deliveries
Correct answer: Tracking hazardous waste from its point of origin to the disposal facility
The Uniform Hazardous Waste Manifest tracks hazardous waste from generation through transportation to final disposal, ensuring proper accountability.
Question 3: Under the HMR, what action must a driver take before pulling over at a rest stop with a placarded vehicle?
- Notify local law enforcement
- Check that the load is secure and no leaks are present (Correct answer)
- Obtain a temporary parking permit from the carrier
- Confirm the stop is at least 5 miles from the last stop
Correct answer: Check that the load is secure and no leaks are present
Before stopping at a rest area or other location, the driver should verify cargo is secure and there are no leaks or other safety issues.
Question 4: Which division of Class 1 (Explosives) is considered the most dangerous and cannot be transported by motor vehicle on public roads?
- Division 1.1 (Correct answer)
- Division 1.2
- Division 1.3
- Division 1.4
Correct answer: Division 1.1
Division 1.1 explosives have a mass explosion hazard and are the most dangerous; while they can be transported under special conditions, Division 1.1 has the strictest restrictions.
Question 5: What must a shipper do before offering a hazardous material for transportation?
- Obtain a special permit from the state
- Properly classify, describe, package, mark, and label the material (Correct answer)
- Notify the destination state's DMV
- Receive approval from the receiving carrier's safety officer
Correct answer: Properly classify, describe, package, mark, and label the material
Shippers must properly classify, describe, package, mark, label, and provide proper shipping papers for all hazardous materials before offering them for transport.
Question 6: What does 'RQ' on a shipping paper indicate?
- The material requires refrigeration during transport
- The shipment contains a reportable quantity of a hazardous substance (Correct answer)
- The route requires special authorization
- The recipient must sign a release form upon delivery
Correct answer: The shipment contains a reportable quantity of a hazardous substance
'RQ' stands for Reportable Quantity — a release of this substance in the listed quantity or greater must be reported to the National Response Center.
Question 7: When is a DANGEROUS placard permitted instead of separate class placards?
- When transporting two or more classes of HazMat with 1,001 lbs or more of each
- When transporting two or more classes of HazMat, each in amounts less than 1,001 lbs, with a combined weight of 1,001 lbs or more (Correct answer)
- Whenever the shipper prefers a single placard for simplicity
- When transporting only non-bulk packages of mixed hazard classes
Correct answer: When transporting two or more classes of HazMat, each in amounts less than 1,001 lbs, with a combined weight of 1,001 lbs or more
A DANGEROUS placard may be used when transporting two or more HazMat classes, each in quantities less than 1,001 lbs but totaling 1,001 lbs or more combined.
HazMat Hazardous Materials (HazMat) Endorsement Operations 4
Which class of hazardous material requires the 'POISON' or 'TOXIC' label?