SBCA Safety & Regulatory Compliance — Questions and Answers

Question 1: What agency sets safety standards for electrical work in satellite installation?

EPA
FCC
OSHA (Correct answer)
FAA

Correct answer: OSHA

OSHA (Occupational Safety and Health Administration) is a federal agency responsible for setting and enforcing safety and health standards in most private sector workplaces. This includes establishing guidelines for electrical work, fall protection, and other safety protocols relevant to satellite installation. Adhering to OSHA standards helps ensure a safe working environment and prevents workplace injuries for installers.

Question 2: Why should installers follow local building codes?

For style consistency
Reduce cost
Ensure safety and compliance (Correct answer)
Impress inspectors

Correct answer: Ensure safety and compliance

Installers must follow local building codes to ensure both safety and compliance with legal requirements. These codes dictate minimum standards for construction, electrical work, and structural integrity, protecting both the installers and the occupants of the building. Adherence to codes prevents potential hazards, avoids fines, and ensures the installation is legally sound and durable.

Question 3: What is the best practice when working on a roof?

Wear bright colors
Use ladders only
Wear harness and fall protection (Correct answer)
Work barefoot

Correct answer: Wear harness and fall protection

Working on roofs presents significant fall hazards, which are a leading cause of serious injuries and fatalities. Wearing a harness and utilizing appropriate fall protection equipment, such as lifelines and anchor points, is the best practice to mitigate these risks. This safety measure ensures that if a fall occurs, the worker is safely caught, preventing severe injury or death.

Question 4: What must be done before drilling into a wall?

Check weather forecast
Locate wall studs only
Identify internal utilities (Correct answer)
Drill small holes first

Correct answer: Identify internal utilities

Before drilling into a wall, it is imperative to identify internal utilities such as electrical wiring, plumbing pipes, and gas lines. Drilling into these can cause severe hazards, including electric shock, gas leaks, water damage, or structural compromise. Using a stud finder, blueprints, or visual inspection helps prevent these dangerous and costly mistakes, ensuring a safe installation.

Question 5: Which regulation governs RF exposure limits?

OSHA 1910
NEC 310
FCC RF Exposure (Correct answer)
NFPA 70

Correct answer: FCC RF Exposure

The FCC (Federal Communications Commission) is responsible for regulating interstate and international communications, including setting standards for radiofrequency (RF) emissions. The FCC RF Exposure limits are regulations designed to protect the public and workers from potential health risks associated with exposure to electromagnetic fields from devices like satellite transmitters. Compliance ensures that RF energy levels remain within safe thresholds.

Question 6: How should hazardous tools be stored?

On the roof
In your vehicle
In secure tool storage (Correct answer)
Near the ladder

Correct answer: In secure tool storage

Hazardous tools, such as power tools, sharp instruments, or chemicals, must be stored in secure tool storage. This practice prevents unauthorized access, accidental injury, and theft, ensuring the safety of everyone on the premises. Proper storage also protects the tools from damage and keeps them organized for efficient use.

Question 7: What should be done in case of electric shock?

Shake the person
Apply water
Call for help and shut off power (Correct answer)
Take a photo

Correct answer: Call for help and shut off power

In the event of an electric shock, the immediate and most critical actions are to call for emergency medical help and safely shut off the power source. Disconnecting the power removes the person from the electrical current, preventing further harm to the victim and ensuring the safety of rescuers. Attempting to touch or move the person while they are still energized can endanger the rescuer.

Question 8: What document lists all hazards and how to handle them?

Permit
Invoice
MSDS (Correct answer)
Wiring plan

Correct answer: MSDS

An MSDS (Material Safety Data Sheet), now commonly known as an SDS (Safety Data Sheet), is a crucial document that lists all potential hazards associated with a specific chemical or material. It provides detailed information on safe handling procedures, emergency control measures, first-aid instructions, and proper disposal. This ensures workers are fully informed about risks and how to manage them safely.

Question 9: Why are warning labels used on satellite systems?

Decoration
Marketing
Indicate hazards (Correct answer)
For directions

Correct answer: Indicate hazards

Warning labels on satellite systems are used to clearly indicate potential hazards to installers and users. These labels alert individuals to dangers such as high voltage, RF exposure, or pinch points, which could lead to injury if proper precautions are not taken. They serve as a critical safety communication tool, promoting awareness and safe interaction with the equipment.

SBCA Safety & Regulatory Compliance

What agency sets safety standards for electrical work in satellite installation?