Free FAA-107 Remote ID (RID) Regulations Questions and Answers — Questions and Answers
Question 1: As of September 16, 2023, what is required for most drones that need to be registered with the FAA?
- They must be equipped with an ADS-B Out transponder.
- They must comply with Remote ID regulations. (Correct answer)
- They must operate below 200 feet AGL at all times.
- They must have an anti-collision light visible for 5 statute miles.
Correct answer: They must comply with Remote ID regulations.
The FAA mandated that all drone pilots required to register their UAS must operate their aircraft in accordance with the Remote ID rule by this date. This rule enhances safety and security by allowing the FAA and law enforcement to identify drones flying in their jurisdiction.
Question 2: Which of the following is NOT a valid method for complying with the FAA's Remote ID rule?
- Operating a drone with a Remote ID broadcast module attached.
- Operating a Standard Remote ID drone.
- Operating a drone without Remote ID within a FRIA.
- Operating a drone weighing less than 0.55 pounds for commercial purposes without RID. (Correct answer)
Correct answer: Operating a drone weighing less than 0.55 pounds for commercial purposes without RID.
The three ways to comply are using a Standard RID drone, retrofitting a drone with a broadcast module, or flying in an FAA-Recognized Identification Area (FRIA). While drones under 0.55 pounds do not require registration or Remote ID for purely recreational flying, this is an exemption, not a method of compliance for drones that do require it.
Question 3: A Standard Remote ID drone broadcasts several pieces of information. Which of the following is broadcasted?
- The remote pilot's certificate number.
- The location of the control station. (Correct answer)
- The name of the registered drone owner.
- The remaining battery life of the drone.
Correct answer: The location of the control station.
Standard Remote ID systems broadcast the drone's serial number, its current position and altitude, its velocity, and the location and elevation of the control station. The pilot's personal information, such as their name or certificate number, is not broadcasted directly.
Question 4: When operating a drone without Remote ID capability within an FAA-Recognized Identification Area (FRIA), the remote pilot must ensure the drone...
- remains below 100 feet AGL.
- is flown for recreational purposes only.
- remains within the FRIA's boundaries and within visual line of sight. (Correct answer)
- has a visual observer present for the entire flight.
Correct answer: remains within the FRIA's boundaries and within visual line of sight.
FRIAs are specific geographic areas where drones without broadcast capabilities can be flown legally. The remote pilot is responsible for keeping the aircraft within the lateral boundaries of the FRIA and maintaining visual line of sight at all times.
Question 5: During a flight, you receive a notification that your drone's Remote ID system is malfunctioning. What is the required course of action?
- Immediately return to the home point and land.
- Land the drone as soon as practicable. (Correct answer)
- Finish the planned mission and then land.
- Notify the nearest ATC facility of the malfunction.
Correct answer: Land the drone as soon as practicable.
If the Remote ID system fails during flight, the regulations require the remote pilot to land the aircraft as soon as is practical and safe to do so. Continued flight with a non-compliant system is not permitted.
Question 6: If you attach a Remote ID broadcast module to your drone to become compliant, what must you do regarding FAA registration?
- Nothing, the module is pre-registered by the manufacturer.
- Submit a new registration application for the drone.
- Link the broadcast module's serial number to your drone's registration record. (Correct answer)
- Affix a second registration number to the drone for the module.
Correct answer: Link the broadcast module's serial number to your drone's registration record.
When using a broadcast module, the module's serial number must be entered into your drone's registration information via the FAA DroneZone website. This ensures that the broadcasted signal can be correctly associated with your registered aircraft.
Free FAA-107 Remote ID (RID) Regulations Questions and Answers
As of September 16, 2023, what is required for most drones that need to be registered with the FAA?