Free AMA Learner's License Questions and Answers — Questions and Answers
Question 1: What action should you take if you feel tired while driving?
- You should stop and take a break. (Correct answer)
- You should drive cautiously and slowly.
- To stay awake, turn on the radio.
- Grab some fresh air by opening the window.
Correct answer: You should stop and take a break.
Driving while tired significantly impairs your judgment, reaction time, and ability to stay focused, making it as dangerous as driving under the influence. If you feel tired, the safest and most responsible action is to pull over to a safe location and take a break. Resting allows you to regain alertness and reduces the risk of a fatigue-related accident.
Question 2: On which vehicles can you find a combination of flashing red and white lights?
- Tow trucks
- Firetrucks and ambulances (Correct answer)
- Police patrol vehicles
- Snow removal vehicles
Correct answer: Firetrucks and ambulances
In Alberta, emergency vehicles like firetrucks and ambulances are equipped with a combination of flashing red and white lights. These distinctive lights are used to signal their emergency status and alert other drivers to yield the right-of-way. This helps ensure they can respond quickly and safely to critical situations.
Question 3: Out of the following, which one is not a turnabout?
- A 2-point turn
- A 3-point turn
- A right turn (Correct answer)
- A U-turn
Correct answer: A right turn
A turnabout is a maneuver used to reverse the direction of your vehicle, allowing you to travel in the opposite direction. Examples include 2-point turns, 3-point turns, and U-turns, all of which involve changing your car's heading by 180 degrees. A right turn, however, simply changes your direction by 90 degrees and does not reverse your overall travel path.
Question 4: What are the requirements to obtain a probationary driver's license (Class 5)?
- You must be a licensed pilot.
- You must be at least sixteen years old.
- You must pass the required road test in Alberta.
- Both B and C (Correct answer)
Correct answer: Both B and C
To obtain a probationary driver's license (Class 5) in Alberta, you must meet two key requirements. First, you must be at least sixteen years old to be eligible. Second, you are required to successfully pass the official Class 5 road test administered in Alberta, demonstrating your driving competency.
Question 5: When is it acceptable to reverse on a freeway?
- Never. It is never permitted to reverse on a freeway. (Correct answer)
- Just on the shoulder and with the flashing hazard lights.
- When the hazard lights are on.
- When you slowly back up.
Correct answer: Never. It is never permitted to reverse on a freeway.
Reversing on a freeway is strictly prohibited and extremely dangerous under any circumstances. Freeways are designed for high-speed, one-way traffic flow, and backing up, even on the shoulder, creates a severe risk of collision with fast-moving vehicles. Always proceed forward on a freeway and exit at the next available ramp if you miss your turn.
Question 6: What can you do to lessen possible collision with an animal?
- You should turn off your headlights.
- You should be mindful of animal crossing signs.
- You should take extra precautions at dawn and dark.
- Both B and C (Correct answer)
Correct answer: Both B and C
To lessen the risk of collision with an animal, it's crucial to be aware and cautious. Paying attention to animal crossing signs alerts you to areas where animals are frequently present. Additionally, taking extra precautions at dawn and dusk is important, as many animals are most active during these low-light periods, making them harder to spot.
Question 7: How do you properly change lanes?
- When it's safe to move forward, check your blind spots, your mirrors, and your signal. (Correct answer)
- Proceed after checking your mirrors and giving a signal.
- Proceed after checking your blind zone and mirrors.
- After giving a signal, continue.
Correct answer: When it's safe to move forward, check your blind spots, your mirrors, and your signal.
Properly changing lanes involves a sequence of actions to ensure safety and communication. First, signal your intention to change lanes, then check your rear-view and side mirrors for traffic. Finally, check your blind spots by turning your head before safely moving into the desired lane when it is clear.
Question 8: What should you do when you arrive at the traffic circle
- Give way to any oncoming traffic in the circle.
- Give way to pedestrians.
- As soon as you get to the circle, slow down.
- All of the above. (Correct answer)
Correct answer: All of the above.
When approaching and entering a traffic circle (roundabout), it's essential to follow several rules for safety and smooth traffic flow. You must slow down as you approach, yield to any traffic already circulating within the circle, and also yield to pedestrians who may be crossing. Adhering to all these steps ensures a safe passage through the intersection.
Question 9: What should you do if you get angry or upset before driving?
- Before you drive, try to calm down. (Correct answer)
- Do not reflect on what enraged you while driving.
- When you drive, pay attention and use caution.
- Take deep breaths to help you regain composure while driving.
Correct answer: Before you drive, try to calm down.
Driving while angry or upset can significantly impair your judgment, increase your risk-taking behavior, and reduce your ability to concentrate on the road. It is crucial to manage your emotions before getting behind the wheel. Taking time to calm down ensures you are in a focused and responsible state to drive safely.
Question 10: You should slow down_____ when exiting from a highway.
- only when there is traffic behind
- after entering the deceleration lane (Correct answer)
- before arriving at the deceleration lane
- before turning your signal on
Correct answer: after entering the deceleration lane
When exiting a highway, you should slow down after you have entered the deceleration lane. This lane is specifically designed to allow you to reduce your speed safely without impeding the flow of traffic on the main highway. Slowing down too early on the highway itself can create a hazard for other drivers.
Question 11: What does a white diamond marker in a lane mean?
- Only specific vehicles are allowed to use this lane. (Correct answer)
- A traffic circle is up ahead.
- Parking is permitted in the designated lane.
- A railroad crossing is up ahead.
Correct answer: Only specific vehicles are allowed to use this lane.
A white diamond marker painted in a lane signifies that it is a restricted-use lane. This means that only specific vehicles are allowed to use that lane, such as high-occupancy vehicles (HOV), buses, or bicycles. Drivers must pay attention to these markings to ensure they are in the correct lane for their vehicle type.
Free AMA Learner's License Questions and Answers
What action should you take if you feel tired while driving?