Forklift certification Certification Forklift Instructions 2 — Questions and Answers
Question 1: Before starting a forklift shift, what must the operator complete first?
- A pre-operation inspection (Correct answer)
- A lunch break
- A parking check only
- A fuel receipt
Correct answer: A pre-operation inspection
OSHA requires a daily pre-operation inspection before the forklift is used.
Question 2: If a forklift is found defective during inspection, the operator should:
- Use it carefully anyway
- Take it out of service and report it (Correct answer)
- Fix it while driving
- Ignore minor issues
Correct answer: Take it out of service and report it
A defective forklift must be removed from service until repaired.
Question 3: When traveling with a load, the forks should be:
- Raised high for visibility
- Tilted forward
- Low and tilted slightly back (Correct answer)
- At eye level
Correct answer: Low and tilted slightly back
Carrying a load low and tilted back improves stability and control.
Question 4: What should an operator do when approaching a blind intersection?
- Speed up to clear it fast
- Sound the horn and slow down (Correct answer)
- Turn off the lights
- Raise the forks
Correct answer: Sound the horn and slow down
Sounding the horn and slowing warns others and prevents collisions.
Question 5: The load capacity of a forklift is found on the:
- Operator's badge
- Data (capacity) plate (Correct answer)
- Warehouse door
- Fuel gauge
Correct answer: Data (capacity) plate
The manufacturer's data plate lists the rated load capacity.
Question 6: When driving on a ramp with a loaded forklift, the operator should:
- Drive forward up, forks pointing upgrade (Correct answer)
- Drive down forward with load ahead
- Turn sideways on the ramp
- Coast in neutral
Correct answer: Drive forward up, forks pointing upgrade
With a load, travel up ramps forward and down ramps in reverse to keep the load stable.
Question 7: Seat belts on a sit-down forklift should be worn:
- Only on ramps
- Only outdoors
- Whenever operating the truck (Correct answer)
- Never, they restrict movement
Correct answer: Whenever operating the truck
Seat belts keep the operator within the protective cage during a tip-over.
Forklift certification Certification Forklift Instructions 2
Before starting a forklift shift, what must the operator complete first?