Forklift certification Certification Forklift certification Safe Driving and Maneuvering 2 — Questions and Answers
Question 1: When traveling down a ramp with a loaded forklift, which direction should the forks point?
- Downhill (facing down the ramp)
- Uphill (load pointing up the grade) (Correct answer)
- Sideways across the ramp
- It does not matter with a load
Correct answer: Uphill (load pointing up the grade)
A loaded forklift should travel with the load pointed uphill on grades to maintain stability.
Question 2: What is the maximum safe travel speed for a forklift in a busy warehouse aisle?
- As fast as the machine allows
- A walking pace or slower (Correct answer)
- 25 mph
- Whatever keeps up with foot traffic
Correct answer: A walking pace or slower
Forklifts should travel at a walking pace or slower in areas with pedestrians and tight spaces.
Question 3: Before turning a corner or entering an intersection, the operator should:
- Speed up to clear it quickly
- Sound the horn and slow down (Correct answer)
- Raise the forks fully
- Turn off the lights
Correct answer: Sound the horn and slow down
Sounding the horn and slowing down warns pedestrians and prevents collisions at blind spots.
Question 4: When a load blocks your forward vision, you should:
- Travel in reverse or use a spotter (Correct answer)
- Lean out the side and keep going
- Raise the load higher to see under it
- Ask a pedestrian to guide you by hand
Correct answer: Travel in reverse or use a spotter
When forward visibility is obstructed, drive in reverse or use a signal person to see the path.
Question 5: What is the safe following distance behind another forklift?
- One truck length
- Three truck lengths (Correct answer)
- As close as possible
- Half a truck length
Correct answer: Three truck lengths
Maintaining about three truck lengths gives adequate stopping distance between forklifts.
Question 6: When should a forklift's parking brake be set?
- Only overnight
- Whenever the operator dismounts (Correct answer)
- Never, to save wear
- Only on inclines
Correct answer: Whenever the operator dismounts
The parking brake must be applied every time the operator leaves the forklift.
Question 7: How should you cross railroad tracks with a forklift?
- At high speed straight across
- Diagonally at an angle (Correct answer)
- Stop on the tracks to check the load
- Reverse over them
Correct answer: Diagonally at an angle
Crossing tracks diagonally prevents the wheels from getting caught in the rails.
Forklift certification Certification Forklift certification Safe Driving and Maneuvering 2
When traveling down a ramp with a loaded forklift, which direction should the forks point?