F-01 - F-01 Fireguard Fire Hazard Identification Questions and Answers 2 — Questions and Answers
Question 1: Which is a common fire hazard fire guards should identify during patrols?
- Clean organized storage
- Overloaded electrical outlets and extension cords used as permanent wiring (Correct answer)
- Properly maintained extinguishers
- Clear exit pathways
Correct answer: Overloaded electrical outlets and extension cords used as permanent wiring
Overloaded outlets and improper extension cord use are common fire hazards.
Overloaded electrical outlets and extension cords used as permanent wiring are significant hazards. Extension cords can overheat when overloaded. Look for multiple plug adapters, cords under rugs or through walls, damaged cords, and warm outlets.
Question 2: How should a fire guard assess the hazard level of stored materials?
- All materials pose the same risk
- Evaluate type, quantity, arrangement, and proximity to ignition sources (Correct answer)
- Only check for gasoline
- Storage areas need no checking
Correct answer: Evaluate type, quantity, arrangement, and proximity to ignition sources
Evaluate combustibility, quantity, arrangement, and proximity to ignition sources.
Consider the material type (flammable liquids are higher risk), quantity (affects fire load), arrangement (materials stacked too high create rapid fire progression), proximity to ignition sources, and separation between incompatible materials.
Question 3: What fire hazard does improper disposal of oily rags present?
- No hazard
- Spontaneous combustion from heat buildup during oxidation (Correct answer)
- Only a slip hazard
- A minor odor problem
Correct answer: Spontaneous combustion from heat buildup during oxidation
Oily rags can self-ignite through spontaneous combustion.
When rags soaked with drying oils are piled together, oxidation generates heat. If the heat cannot dissipate, temperature can reach ignition point without any external spark. Use approved self-closing metal containers for disposal.
Question 4: What HVAC-related fire hazard should a fire guard look for?
- HVAC systems are never hazardous
- Combustibles near heating equipment, blocked vents, and malfunction signs (Correct answer)
- Only check air conditioning comfort
- HVAC is for maintenance only
Correct answer: Combustibles near heating equipment, blocked vents, and malfunction signs
Check for combustibles near heaters, blocked ventilation, and equipment malfunction signs.
Combustible materials too close to heating equipment, blocked or restricted ventilation, accumulated dust on equipment, and electrical malfunctions in HVAC systems are all fire hazards. Report burning smells or unusual odors immediately.
Question 5: How should a fire guard respond to a propped-open fire door?
- Leave it open
- Close it immediately and report the violation (Correct answer)
- Only close it during a fire
- Depends on foot traffic
Correct answer: Close it immediately and report the violation
Fire doors must remain closed. Propped-open doors must be closed immediately.
A propped-open fire door allows fire, smoke, and toxic gases to spread between compartments, potentially cutting off evacuation routes. Close it immediately, remove the prop, document the finding, and report to building management.
Question 6: What fire hazard should be identified in building stairwells?
- Stairwells are always safe
- Combustible storage, blocked passages, non-functioning lighting, propped doors (Correct answer)
- Only check handrails
- Stairwells are not part of patrol
Correct answer: Combustible storage, blocked passages, non-functioning lighting, propped doors
Stairwells must be clear of combustibles, unobstructed, properly lit, with fire doors closed.
Stairwell hazards include prohibited combustible storage, propped-open fire doors, non-functioning emergency lighting, blocked passages, accumulated debris, and damaged enclosure walls. These get high priority for correction.
Which is a common fire hazard fire guards should identify during patrols?