CSWA - Certified Solidworks Associate Dimensions and Annotations Questions and Answers — Questions and Answers
Question 1: When sketching, a designer adds a dimension that conflicts with existing dimensions and relations. What is this state called, and how does SOLIDWORKS typically indicate it?
- Under-defined, indicated by blue-colored sketch entities.
- Over-defined, indicated by yellow or red-colored dimensions/relations. (Correct answer)
- Fully-defined, indicated by black-colored sketch entities.
- Dangling, indicated by brown-colored entities.
Correct answer: Over-defined, indicated by yellow or red-colored dimensions/relations.
When a dimension or relation is redundant or conflicts with others, the sketch is over-defined. SOLIDWORKS signals this with yellow or red colors to prompt the user to resolve the conflict.
Question 2: Which of the following best describes a 'driven' or 'reference' dimension in a SOLIDWORKS sketch?
- A dimension that links the sketch to a global variable or equation.
- A dimension that controls and changes the sketch geometry when its value is edited.
- A read-only dimension that reports a measurement but does not control the sketch geometry. (Correct answer)
- A dimension that is automatically created by the 'Fully Define Sketch' tool.
Correct answer: A read-only dimension that reports a measurement but does not control the sketch geometry.
A driven (or reference) dimension is for measurement purposes only. It is shown in gray and often in parentheses by default and will update if the geometry changes, but it cannot be edited to drive the geometry. This prevents over-defining the sketch.
Question 3: A designer has created a part using the Hole Wizard to create several counterbore holes. When creating the manufacturing drawing, what is the most efficient and standardized method to add detailed specifications for these holes?
- Use the Hole Callout tool on the Annotation toolbar. (Correct answer)
- Manually add individual notes with leaders pointing to each hole.
- Use the Smart Dimension tool to measure the diameter of each concentric circle.
- Use the Model Items tool and select only the hole features.
Correct answer: Use the Hole Callout tool on the Annotation toolbar.
The Hole Callout tool is specifically designed to read the information from a Hole Wizard feature and automatically generate a standardized, detailed note that includes diameter, depth, counterbore/countersink details, and instance counts.
Question 4: In a SOLIDWORKS sketch, what does the color black signify for sketch entities like lines and arcs?
- The entities are part of construction geometry.
- The entities are fixed in place and cannot be edited.
- The entities are currently selected by the user.
- The entities are fully defined by dimensions and/or geometric relations. (Correct answer)
Correct answer: The entities are fully defined by dimensions and/or geometric relations.
Black indicates that a sketch entity is fully defined. Its position and size are locked by a combination of dimensions and relations relative to the origin or other defined geometry. Blue indicates it is under-defined.
Question 5: A designer receives a part file modeled in inches. The drawing requirements specify that all dimensions must be displayed in millimeters with a precision of three decimal places. Where would the designer primarily make this change for the entire document?
- In the System Options > General settings.
- In the Document Properties > Units settings. (Correct answer)
- In the FeatureManager Design Tree by right-clicking the 'Material' feature.
- In the Heads-Up View Toolbar in the lower-right corner of the screen.
Correct answer: In the Document Properties > Units settings.
Document-wide settings for the primary unit system (like changing from IPS to MMGS) and default precision for dimensions are controlled under Tools > Options > Document Properties > Units.
Question 6: When creating a drawing, which tool allows a user to automatically import dimensions and tolerances that were created in the 3D part model into a specific drawing view?
- The Model Items tool. (Correct answer)
- The Note tool.
- The Autodimension tool.
- The Smart Dimension tool.
Correct answer: The Model Items tool.
The 'Model Items' command is used to import annotations (dimensions, tolerances, hole callouts, etc.) from the source part or assembly model into the drawing. This promotes design intent and reduces the redundant work of re-dimensioning the drawing from scratch.
CSWA - Certified Solidworks Associate Dimensions and Annotations Questions and Answers
When sketching, a designer adds a dimension that conflicts with existing dimensions and relations.
What is this state called, and how does SOLIDWORKS typically indicate it?