CSCS Cheat Sheet 2026
The 30 highest-yield CSCS facts, distilled from real exam questions. Print it, save it as a PDF, or study it here — free, no sign-up.
50 questions
45 min time limit
90% to pass
- Why should practice questions be included in the study guide for the CSCS Certification exam? → To test knowledge and identify areas where more review is needed
- A construction site has experienced three hand lacerations in one month from the same piece of equipment. What is the most appropriate corrective action? → Conduct a hazard analysis of the equipment and implement engineering controls or guarding
- Which of the following is a key principle of good housekeeping on a construction site? → Regularly clearing walkways and storing materials in designated areas
- What does a green safety sign on a construction site typically indicate? → A safe condition, such as the location of an emergency exit or first aid point
- What physical safeguards should be put in place when construction work must take place near overhead power lines? → Goal-post height restriction barriers and warning signs should be erected
- What does a color-coded inspection tag on a tool or piece of equipment indicate? → That the tool has been inspected and is safe to use within a specific period
- A worker who has completed an apprenticeship and holds an NVQ Level 3 would typically qualify for which CSCS card? → Gold Advanced Craft card
- If a scaffold inspection is required under the Working at Height Regulations, how often must it be carried out at minimum? → Every 7 days and after any event that could affect stability
- On a construction site, what does a solid blue circle sign with a white pictogram signify? → A mandatory action that must be carried out
- What is a 'permit to work' (PTW) used for on a construction site? → To formally authorize high-risk tasks, ensuring controls are in place before work starts
- When should a dynamic risk assessment be carried out? → Continuously throughout a task as conditions change unexpectedly
- What is a crucial prerequisite for many construction firms? → Having a CSCS Certification
- Which of the following activities requires an environmental permit issued by the relevant authority? → Discharging treated water from a construction site into a watercourse
- What is the legal significance of a 'no-damages-for-delay' clause in a construction contract? → It bars the contractor from recovering monetary compensation for owner-caused delays
- Under what circumstance is it acceptable to override an interlock device on a piece of construction equipment? → It is never acceptable to override a safety interlock device
- A worker notices a gas leak smell near a trench. What is the CORRECT immediate response? → Evacuate all workers, call the gas company, and restrict the area
- Which of the following is the main purpose of a risk assessment on a construction site? → To identify hazards and evaluate the risks before they cause harm.
- What is the primary purpose of compartmentalization in building fire safety? → To contain fire and smoke and slow their spread
- If a worker is required to work in a trench deeper than 5 feet, what OSHA protection system is typically required? → Sloping, shoring, or a trench box protective system
- Under OSHA's recordkeeping rule, which of the following injuries is generally NOT recordable on the OSHA 300 log? → First-aid-only treatment for a minor cut
- According to the Electricity at Work Regulations 1989, who is permitted to carry out work on electrical systems on a construction site? → A person who is competent, possessing the necessary technical knowledge and experience
- Under the CSCS scheme, which of the following would disqualify an applicant from receiving a card? → Failing to pass the required HS&E test
- A worker notices their safety helmet has a crack after dropping it. What should they do? → Replace the helmet immediately
- What type of fire extinguisher is SAFE to use on electrical equipment fires? → CO2 (carbon dioxide) extinguisher
- A 'permit-to-work' system for hot work requires that after the work is completed, a fire watch must be maintained for at least: → 30 minutes
- Which regulation primarily governs the use of PPE in the workplace in the UK? → The Personal Protective Equipment at Work Regulations 1992 (as amended 2022)
- What does a thorough study manual for the CSCS Certification exam serve? → To help navigate through the vast amount of information covered in the exam
- Which of the following is a critical legal requirement for fire escape routes on a construction site? → They must be kept clear of obstructions and be clearly signposted at all times.
- Under the Contract Work Hours and Safety Standards Act (CWHSSA), what overtime rate must be paid to laborers on federal contracts over $100,000? → 1.5 times the basic rate
- Which legislation requires employers to consult with their employees on health and safety matters? → Both A and B
Turn these facts into recall:
Was this helpful?