Construction OSHA Construction Safety 1 — Questions and Answers
Question 1: What is the minimum height at which fall protection is required for workers on construction sites under OSHA standards?
- 4 feet
- 6 feet (Correct answer)
- 8 feet
- 10 feet
Correct answer: 6 feet
OSHA 29 CFR 1926.502 requires fall protection for construction workers at heights of 6 feet or more above a lower level.
Question 2: Which OSHA standard governs the use of personal protective equipment (PPE) on construction sites?
- 29 CFR 1926.100 (Correct answer)
- 29 CFR 1926.50
- 29 CFR 1910.132
- 29 CFR 1926.200
Correct answer: 29 CFR 1926.100
OSHA 29 CFR 1926.100 covers head protection and PPE requirements specific to construction.
Question 3: What is the maximum weight capacity of a standard single-width scaffold plank used in construction?
- 25 lbs/sq ft
- 50 lbs/sq ft (Correct answer)
- 75 lbs/sq ft
- 100 lbs/sq ft
Correct answer: 50 lbs/sq ft
OSHA requires scaffold planks to support at least 4 times the intended load, with standard platforms rated for 50 lbs per square foot.
Question 4: How far must a ladder extend above the landing surface when used to access an elevated work area?
- 1 foot
- 2 feet
- 3 feet (Correct answer)
- 5 feet
Correct answer: 3 feet
OSHA requires portable ladders to extend at least 3 feet above the landing surface they are used to access.
Question 5: What is the required lateral distance from an excavation for spoil pile placement per OSHA?
- 1 foot
- 2 feet (Correct answer)
- 3 feet
- 5 feet
Correct answer: 2 feet
OSHA 29 CFR 1926.651 requires excavated material (spoil) to be placed at least 2 feet from the edge of the excavation.
Question 6: Under OSHA regulations, how often must a competent person inspect an excavation?
- Once per week
- Before each work shift (Correct answer)
- Every 4 hours
- Only after rain events
Correct answer: Before each work shift
OSHA 29 CFR 1926.651(k) requires a competent person to inspect excavations before each work shift and as needed.
What is the minimum height at which fall protection is required for workers on construction sites under OSHA standards?