CFP Site Management 2 — Questions and Answers
Question 1: When a fence installation site has unstable soil conditions, what is the recommended initial step before setting posts?
- Begin installation and adjust as needed
- Conduct a soil bearing capacity test (Correct answer)
- Add extra concrete to each post hole
- Use shorter posts to reduce load
Correct answer: Conduct a soil bearing capacity test
A soil bearing capacity test identifies the soil's ability to support loads, guiding proper post depth and foundation design.
Question 2: What is the primary purpose of a site survey before beginning a fence installation project?
- To estimate material quantities only
- To identify property boundaries, utilities, and obstacles (Correct answer)
- To calculate labor hours required
- To determine the fence color scheme
Correct answer: To identify property boundaries, utilities, and obstacles
A pre-installation site survey establishes property boundaries, locates underground utilities, and identifies physical obstacles that affect the project plan.
Question 3: Which document is typically required before excavating on a commercial fence installation site?
- A material delivery schedule
- An 811 utility locate ticket (Correct answer)
- A customer satisfaction form
- A post-installation inspection report
Correct answer: An 811 utility locate ticket
Calling 811 before digging is federally required and triggers utility companies to mark underground lines, preventing dangerous strikes.
Question 4: A crew is installing a fence along a slope. Which layout technique ensures consistent visual appearance despite grade changes?
- Racked (stepped) fencing (Correct answer)
- Level top-rail fencing only
- Ignoring grade changes entirely
- Installing all panels at the lowest elevation
Correct answer: Racked (stepped) fencing
Racking (or stepping) the fence panels allows them to follow the slope while maintaining consistent post spacing and a uniform look.
Question 5: What is the correct protocol when a job site has an active 811 utility mark that crosses the planned fence line?
- Hand-dig within 18–24 inches of the mark (Correct answer)
- Use power equipment as normal
- Relocate the fence line without notifying the owner
- Ignore marks older than 7 days
Correct answer: Hand-dig within 18–24 inches of the mark
Within the tolerance zone (typically 18–24 inches of utility marks), hand digging is required to avoid damaging buried lines.
Question 6: During a large commercial fencing project, daily job-site logs are MOST valuable for which purpose?
- Tracking employee personal information
- Documenting work completed, weather, and issues for liability and scheduling (Correct answer)
- Planning the next project's budget
- Ordering office supplies
Correct answer: Documenting work completed, weather, and issues for liability and scheduling
Daily logs create a legal record of site conditions, progress, and incidents that protects the contractor in disputes and aids project management.
Question 7: A homeowner requests that the fence be installed exactly on the property line. What should the contractor do first?
- Start installation immediately to save time
- Ask the homeowner to provide a survey or hire a licensed surveyor (Correct answer)
- Estimate the property line using visual markers
- Place the fence two feet inside the line for safety
Correct answer: Ask the homeowner to provide a survey or hire a licensed surveyor
Only a licensed surveyor can legally establish property boundaries; relying on estimates risks encroachment disputes and costly removal.
CFP Site Management 2
When a fence installation site has unstable soil conditions, what is the recommended initial step before setting posts?