Certified Safety Professional Exam Emergency Response and Fire Protection 1 — Questions and Answers
Question 1: According to NFPA 10, portable fire extinguishers must be inspected at minimum how often?
- Daily
- Monthly (Correct answer)
- Quarterly
- Annually
Correct answer: Monthly
NFPA 10 requires a monthly visual inspection of portable fire extinguishers to ensure they are in proper operating condition.
Question 2: What does the PASS acronym stand for when using a portable fire extinguisher?
- Pull, Aim, Squeeze, Sweep (Correct answer)
- Push, Activate, Spray, Suppress
- Point, Aim, Squeeze, Spray
- Pull, Apply, Squeeze, Spread
Correct answer: Pull, Aim, Squeeze, Sweep
PASS stands for Pull the pin, Aim at the base, Squeeze the handle, and Sweep side to side to extinguish the fire.
Question 3: Which class of fire involves energized electrical equipment?
- Class A
- Class B
- Class C (Correct answer)
- Class D
Correct answer: Class C
Class C fires involve energized electrical equipment and require non-conductive extinguishing agents to prevent electrocution risk.
Question 4: Under OSHA 29 CFR 1910.38, which document must employers maintain that outlines procedures for emergencies including fire, severe weather, and hazardous material releases?
- Job Hazard Analysis
- Emergency Action Plan (EAP) (Correct answer)
- Incident Command System Manual
- Site Safety Plan
Correct answer: Emergency Action Plan (EAP)
OSHA 1910.38 requires employers to have a written Emergency Action Plan covering evacuation procedures, alarm systems, and employee roles.
Question 5: What is the purpose of the Incident Command System (ICS) in emergency response?
- To assign blame after an incident
- To provide a standardized, scalable management framework for emergency response (Correct answer)
- To document chemical inventories
- To calculate financial losses from incidents
Correct answer: To provide a standardized, scalable management framework for emergency response
ICS provides a flexible, scalable command structure used by emergency responders to manage personnel, resources, and communications during an incident.
Question 6: Which NFPA standard covers the installation of sprinkler systems in occupancies?
- NFPA 1
- NFPA 13 (Correct answer)
- NFPA 70
- NFPA 101
Correct answer: NFPA 13
NFPA 13 is the Standard for the Installation of Sprinkler Systems, providing design and installation requirements for automatic fire suppression.
Certified Safety Professional Exam Emergency Response and Fire Protection 1
According to NFPA 10, portable fire extinguishers must be inspected at minimum how often?