AVOP - Airside Vehicle Operator's Permit Airside Markings and Signage Questions and Answers 1 — Questions and Answers
Question 1: While driving on an airside vehicle roadway, you approach a sign with a red background and white text that reads 'RWY 33'. What does this sign indicate?
- A destination sign for Gate 33.
- A mandatory instruction sign for an upcoming runway holding position. (Correct answer)
- An information sign indicating the distance to Runway 33 is 3,300 feet.
- A location sign indicating you are currently on Taxiway 33.
Correct answer: A mandatory instruction sign for an upcoming runway holding position.
Signs with a red background and white inscriptions are mandatory instruction signs. They are used to denote an entrance to a runway or critical area where a vehicle or aircraft must stop and await clearance from Air Traffic Control before proceeding.
Question 2: A vehicle operator is driving on a taxiway and sees a pavement marking consisting of four yellow lines, two solid and two dashed. To proceed onto the runway, which side of the marking must the operator have clearance to cross?
- The dashed lines.
- The solid lines. (Correct answer)
- Either side, as long as the runway is clear.
- The marking is only for aircraft.
Correct answer: The solid lines.
This marking is a runway holding position marking. The two solid yellow lines are always on the side where the vehicle or aircraft must hold. Crossing the solid lines to enter the runway requires explicit clearance from Air Traffic Control.
Question 3: Which of the following best describes the pavement markings for a vehicle roadway on the airside?
- A single solid yellow line indicating the center of the roadway.
- Two solid yellow lines delineating the edges of the roadway.
- White solid lines for the edges and a dashed white line to separate lanes. (Correct answer)
- A series of blue lights embedded in the pavement.
Correct answer: White solid lines for the edges and a dashed white line to separate lanes.
Vehicle roadway markings consist of a white solid line to delineate each edge of the roadway and a dashed line to separate lanes within the roadway. Sometimes, 'zipper' style white markings may be used for the edges instead of solid lines. Yellow markings are used for taxiways and holding positions.
Question 4: You are operating a vehicle on the apron and need to get to the main maintenance facility. You see a sign with a yellow background, black inscriptions, and an arrow. What type of sign is this?
- A mandatory instruction sign.
- A runway distance remaining sign.
- A no-entry sign.
- A direction or destination sign. (Correct answer)
Correct answer: A direction or destination sign.
Signs with a yellow background and black inscriptions are used for location, direction, and destination purposes. An arrow indicates the direction to the specified taxiway or location, guiding vehicles and aircraft around the airfield.
Question 5: A large 'X' marking is observed on the surface of a taxiway. What does this indicate to an airside vehicle operator?
- The taxiway is permanently closed. (Correct answer)
- A designated helicopter landing area.
- An intersection with another taxiway is ahead.
- The boundary of the non-movement area.
Correct answer: The taxiway is permanently closed.
A yellow 'X' marking indicates that a runway or taxiway is closed to all traffic. For permanently closed runways and taxiways, these crosses are placed at each end and at 1,000-foot intervals on runways.
Question 6: When approaching the boundary between a non-movement area and a movement area, a driver will see a specific pavement marking. How is this boundary delineated?
- A single, solid white line.
- A red and white checkered line.
- Two yellow lines: one solid and one dashed. (Correct answer)
- A continuous double solid yellow line.
Correct answer: Two yellow lines: one solid and one dashed.
The non-movement area boundary marking consists of two yellow lines. The solid line is on the non-movement area side, and the dashed line is on the movement area side (the area controlled by ATC). A vehicle must have clearance from ATC before crossing from the non-movement (solid line side) to the movement area (dashed line side).
AVOP - Airside Vehicle Operator's Permit Airside Markings and Signage Questions and Answers 1
While driving on an airside vehicle roadway, you approach a sign with a red background and white text that reads 'RWY 33'.
What does this sign indicate?