Apprenticeship Exam Workplace Safety and OSHA Standards 1 — Questions and Answers
Question 1: What does OSHA stand for?
- Occupational Safety and Health Administration (Correct answer)
- Operational Safety and Hazard Assessment
- Occupational Standards and Hazard Authority
- Office of Safety and Health Administration
Correct answer: Occupational Safety and Health Administration
OSHA stands for the Occupational Safety and Health Administration, which sets and enforces workplace safety standards.
Question 2: Which color is typically used on OSHA safety signs to indicate danger?
- Red (Correct answer)
- Yellow
- Orange
- Green
Correct answer: Red
Red is used on OSHA danger signs to indicate an immediately hazardous situation.
Question 3: What is a Safety Data Sheet (SDS) used for?
- To provide information about hazardous chemical properties and safe handling (Correct answer)
- To document daily work hours
- To record tool inspections
- To list employee emergency contacts
Correct answer: To provide information about hazardous chemical properties and safe handling
An SDS provides detailed information on the properties, hazards, and safe handling of chemicals.
Question 4: What is the minimum height at which fall protection is required in the construction industry?
- 6 feet (Correct answer)
- 4 feet
- 10 feet
- 8 feet
Correct answer: 6 feet
OSHA requires fall protection at 6 feet or more above a lower level in the construction industry.
Question 5: Which PPE is required when working with electrical hazards at an apprenticeship worksite?
- Insulated gloves and safety glasses (Correct answer)
- Hard hat and steel-toed boots only
- Hearing protection and dust mask
- Face shield and knee pads
Correct answer: Insulated gloves and safety glasses
Insulated gloves and safety glasses are required to protect against shock and arc flash when working with electrical hazards.
Question 6: What does a lockout/tagout (LOTO) procedure prevent?
- Accidental re-energization of equipment during maintenance (Correct answer)
- Unauthorized entry into a restricted area
- Fire hazards in electrical panels
- Tool theft on a job site
Correct answer: Accidental re-energization of equipment during maintenance
LOTO ensures equipment is de-energized and cannot be accidentally restarted while maintenance is being performed.
Apprenticeship Exam Workplace Safety and OSHA Standards 1
What does OSHA stand for?